Sublime 之 Go

Ang_SS · · 812 次点击 · · 开始浏览    
这是一个创建于 的文章,其中的信息可能已经有所发展或是发生改变。

操作环境:Win7 64位

前提:

  1. 已安装GO并设置好环境变量后。(例子:我的GOROOT=C:/Go ;GOPATH=D:/gogo;Path中已经添加%GOPATH%\bin
  2. 如果是第二次安装并配置Sublime则需要把之前的Sublime文件删除干净,包括系统盘的有关sublime文件都删除干净,以免出现额外的问题。
  3. 已安装Git

1. 下载Sublime Text3

下载连接:https://www.sublimetext.com

2. 安装Package Control

按下:ctrl+`,调出控制台,复制相关代码,粘贴进控制台,按回车键。

相关代码(只适用于Sublime Text3):

import urllib.request,os,hashlib; h = '6f4c264a24d933ce70df5dedcf1dcaee' + 'ebe013ee18cced0ef93d5f746d80ef60'; pf = 'Package Control.sublime-package'; ipp = sublime.installed_packages_path(); urllib.request.install_opener( urllib.request.build_opener( urllib.request.ProxyHandler()) ); by = urllib.request.urlopen( 'http://packagecontrol.io/' + pf.replace(' ', '%20')).read(); dh = hashlib.sha256(by).hexdigest(); print('Error validating download (got %s instead of %s), please try manual install' % (dh, h)) if dh != h else open(os.path.join( ipp, pf), 'wb' ).write(by)

参考:https://packagecontrol.io/installation#st3

安装完毕后,关闭sublime,再打开,点击Preferences,出现Package Control则安装成功。

3.安装插件

3.1 GoSublime
(作用:补全代码、提示错误、提示改动等功能)

下载地址:https://github.com/DisposaBoy/GoSublime

方法1: 用git clone命令获取,应该会获得一个GoSublime的文件夹。把该文件夹拷贝到sublime的包位置,也就是打开sublime - Preferences - Browse Packages...,将该文件粘贴进来)。

方法2:(建议使用方法1)下载压缩包,解压后会得到一个长名字的文件夹,把文件名改为GoSublime,再把该文件夹移动到安装sublime包的位置,也就是打开sublime - Preferences - Browse Packages...,将文件粘贴进该位置)

然后,关闭sublime,再打开sublime。(我发现:这时GOPATH的bin文件夹内生成一个margo.sublime可运行文件)

情况1:如果出现该情况,就是需要调整Margo文件。

image

(如果没出现这个情况则说明正常)

依次按快捷键 ctrl+.,ctrl+x调出margo.go
复制以下代码,并替换原有代码。

package margo

import (
    "margo.sh/golang"
    "margo.sh/mg"
    "time"
)

// Margo is the entry-point to margo
func Margo(m mg.Args) {
    // See the documentation for `mg.Reducer`
    // comments beginning with `gs:` denote features that replace old GoSublime settings

    // add our reducers (margo plugins) to the store
    // they are run in the specified order
    // and should ideally not block for more than a couple milliseconds
    m.Use(
        // MOTD keeps you updated about new versions and important announcements
        //
        // It adds a new command `motd.sync` available via the UserCmd palette as `Sync MOTD`
        //
        // Interval can be set in order to enable automatic update fetching.
        //
        // When new updates are found, it displays the message in the status bar
        // e.g. `★ margo.sh/cl/18.09.14 ★` a url where you see the upcoming changes before updating
        //
        // It sends the following data to the url https://api.margo.sh/motd.json:
        // * current editor plugin name e.g. `?client=gosublime`
        //   this tells us which editor plugin's changelog to check
        // * current editor plugin version e.g. `?tag=r18.09.14-1`
        //   this allows us to determine if there any updates
        // * whether or not this is the first request of the day e.g. `?firstHit=1`
        //   this allows us to get an estimated count of active users without storing
        //   any personally identifiable data
        //
        // No other data is sent. For more info contact privacy at kuroku.io
        //
        &mg.MOTD{
            // Interval, if set, specifies how often to automatically fetch messages from Endpoint
            // Interval: 3600e9, // automatically fetch updates every hour
        },

        mg.NewReducer(func(mx *mg.Ctx) *mg.State {
            // By default, events (e.g. ViewSaved) are triggered in all files.
            // Replace `mg.AllLangs` with `mg.Go` to restrict events to Go(-lang) files.
            // Please note, however, that this mode is not tested
            // and saving a non-go file will not trigger linters, etc. for that go pkg
            return mx.SetConfig(mx.Config.EnabledForLangs(
                mg.AllLangs,
            ))
        }),

        // Add `go` command integration
        // this adds a new commands:
        // gs: these commands are all callable through 9o:
        // * go: Wrapper around the go command, adding linter support
        // * go.play: Automatically build and run go commands or run go test for packages
        //   with support for linting and unsaved files
        // * go.replay: Wrapper around go.play limited to a single instance
        //   by default this command is bound to ctrl+.,ctrl+r or cmd+.,cmd+r
        //
        // UserCmds are also added for `Go Play` and `Go RePlay`
        &golang.GoCmd{},

        // add the day and time to the status bar
        &DayTimeStatus{},

        // both GoFmt and GoImports will automatically disable the GoSublime version
        // you will need to install the `goimports` tool manually
        // https://godoc.org/golang.org/x/tools/cmd/goimports
        //
        // gs: this replaces settings `fmt_enabled`, `fmt_tab_indent`, `fmt_tab_width`, `fmt_cmd`
        //
        // golang.GoFmt,
        // or
        // golang.GoImports,

        // Configure general auto-completion behaviour
        &golang.MarGocodeCtl{
            // whether or not to include Test*, Benchmark* and Example* functions in the auto-completion list
            // gs: this replaces the `autocomplete_tests` setting
            ProposeTests: false,

            // Don't try to automatically import packages when auto-compeltion fails
            // e.g. when `json.` is typed, if auto-complete fails
            // "encoding/json" is imported and auto-complete attempted on that package instead
            // See AddUnimportedPackages
            NoUnimportedPackages: false,

            // If a package was imported internally for use in auto-completion,
            // insert it in the source code
            // See NoUnimportedPackages
            // e.g. after `json.` is typed, `import "encoding/json"` added to the code
            AddUnimportedPackages: false,

            // Don't preload packages to speed up auto-completion, etc.
            NoPreloading: false,

            // Don't suggest builtin types and functions
            // gs: this replaces the `autocomplete_builtins` setting
            NoBuiltins: false,
        },

        // Enable auto-completion
        // gs: this replaces the `gscomplete_enabled` setting
        &golang.Gocode{
            // show the function parameters. this can take up a lot of space
            ShowFuncParams: true,
        },

        // show func arguments/calltips in the status bar
        // gs: this replaces the `calltips` setting
        &golang.GocodeCalltips{},

        // use guru for goto-definition
        // new commands `goto.definition` and `guru.definition` are defined
        // gs: by default `goto.definition` is bound to ctrl+.,ctrl+g or cmd+.,cmd+g
        &golang.Guru{},

        // add some default context aware-ish snippets
        // gs: this replaces the `autocomplete_snippets` and `default_snippets` settings
        golang.Snippets,

        // add our own snippets
        // gs: this replaces the `snippets` setting
        MySnippets,

        // check the file for syntax errors
        // gs: this and other linters e.g. below,
        //     replaces the settings `gslint_enabled`, `lint_filter`, `comp_lint_enabled`,
        //     `comp_lint_commands`, `gslint_timeout`, `lint_enabled`, `linters`
        &golang.SyntaxCheck{},

        // Add user commands for running tests and benchmarks
        // gs: this adds support for the tests command palette `ctrl+.`,`ctrl+t` or `cmd+.`,`cmd+t`
        &golang.TestCmds{
            // additional args to add to the command when running tests and examples
            TestArgs: []string{},

            // additional args to add to the command when running benchmarks
            BenchArgs: []string{"-benchmem"},
        },

        // run `go install -i` on save
        // golang.GoInstall("-i"),
        // or
        // golang.GoInstallDiscardBinaries("-i"),
        //
        // GoInstallDiscardBinaries will additionally set $GOBIN
        // to a temp directory so binaries are not installed into your $GOPATH/bin
        //
        // the -i flag is used to install imported packages as well
        // it's only supported in go1.10 or newer

        // run `go vet` on save. go vet is ran automatically as part of `go test` in go1.10
        // golang.GoVet(),

        // run `go test -race` on save
        // golang.GoTest("-race"),

        // run `golint` on save
        // &golang.Linter{Name: "golint", Label: "Go/Lint"},

        // run gometalinter on save
        // &golang.Linter{Name: "gometalinter", Args: []string{
        //  "--disable=gas",
        //  "--fast",
        // }},
    )
}

// DayTimeStatus adds the current day and time to the status bar
type DayTimeStatus struct {
    mg.ReducerType
}

func (dts DayTimeStatus) RMount(mx *mg.Ctx) {
    // kick off the ticker when we start
    dispatch := mx.Store.Dispatch
    go func() {
        ticker := time.NewTicker(1 * time.Second)
        for range ticker.C {
            dispatch(mg.Render)
        }
    }()
}

func (dts DayTimeStatus) Reduce(mx *mg.Ctx) *mg.State {
    // we always want to render the time
    // otherwise it will sometimes disappear from the status bar
    now := time.Now()
    format := "Mon, 15:04"
    if now.Second()%2 == 0 {
        format = "Mon, 15 04"
    }
    return mx.AddStatus(now.Format(format))
}

// MySnippets is a slice of functions returning our own snippets
var MySnippets = golang.SnippetFuncs(
    func(cx *golang.CompletionCtx) []mg.Completion {
        // if we're not in a block (i.e. function), do nothing
        if !cx.Scope.Is(golang.BlockScope) {
            return nil
        }

        return []mg.Completion{
            {
                Query: "if err",
                Title: "err != nil { return }",
                Src:   "if ${1:err} != nil {\n\treturn $0\n}",
            },
        }
    },
)

关闭sublime后,重启。
没有出现以上情况则说明安装成功。

参考:https://www.jianshu.com/p/1aaaf18f4adc

在设置中添加以下代码:

{
    "env":{
        "GOPATH":"E:/gogo",
        "GOROOT":"C:/Go",
    }
}

(我没设置以上代码貌似也没出现什么问题。前提是之前的go安装和设置环境变量,我已经设置过了,应该sublime的默认设置会识别到。)

3.2 Goimports(它是一座大坑,爬过这个大坑有巨大的成就感。不把编辑器弄舒服以后怎么好好写代码呢?!所以希望小白的我们可以通过这个过程磨炼下耐心。)
作用:自动添加包,非常有用!

  1. 由于网络原因无法直接下载goimports,需要先下载gopm包。
    打开git Bash Here,输入如下代码:
go get -v github.com/gpmgo/gopm

安装完成后,你会发现在:
1.1 GOPATH\src文件夹中看到github文件夹,以及很多文件。
1.2 GOPATH\bin文件夹中看到gopm的运行文件。

  1. 下载goimports
    在git bash here中输入以下命令
gopm get -g -v -u golang.org/x/tools/cmd/goimports

安装完成后GOPATH\src文件夹中看到golang.org文件夹,里面有很多文件。

如果出现安装不了相应的包,或者显示网络没有链接,则都说明不正确。

出现这个为安装正常


下载goimports

(当然一切的目标是下载到goimports包,如果你有办法下到包即可。可以参考链接:gopm.io,下载你需要的包,当然也有golang.org/x/tools包)

  1. 安装goimports
go install golang.org/x/tools/cmd/goimports

安装完成后,在GOPATH/bin中你会看到goimports的可运行文件。

4.测试运行
打开sublime,调出marge.go(快捷键按ctrl+. ctrl+x),按照图片进行修改。

golang.GoImports

保存修改后,关闭。
再打开一个go文件,点击保存(ctrl+s),可以看到import中会自动添加调用的包,并且会调整代码格式,这真是个非常好的插件。
(灵感来自与这篇文章,《Go语言环境配置 Sublime Text + GoSublime+ gocode + MarGo组》,看来后隐约觉得margo.go很重要,所以抱着在margo里改改代码试试,结果还真成功了。虽然这篇文章的内容我没怎么看,但是给了我一个灵感,让我想到再去margo试试,这个很重要。可以仔细读下margo中关于goimports的描述。)

如果你的没反应,再试试:打开Sublime-Preferences-Package Settings-GoSublime-Settings-User,输入以下代码

{
    "fmt_cmd": ["goimports"],
    "env": {
        "GOPATH": "/your/gopath/here" //输入你的GOPATH,如D:/gogo
    }
}

(以上设置我也没用到,如果你的goimports没有起作用可以试试。)

参考链接:(最后貌似没用上,但你也需要多查看资料,多试试,应该得这样)

  1. .bash_profile 文件改坏了,什么命令都用不了了(https://blog.csdn.net/qq_16177481/article/details/55518267

    (这个是查错的资料)

  2. go环境变量配置 (GOROOT和GOPATH)
    https://www.jianshu.com/p/4e699ff478a5

  3. goimports
    https://blog.csdn.net/geyujiao0828/article/details/89472658

3.3 Gotests
打开sublime,Preferences-Package Control-Install Package-输入Gotests,点击安装。
(研究好了再补充这个test怎么用)


有疑问加站长微信联系(非本文作者)

本文来自:简书

感谢作者:Ang_SS

查看原文:Sublime 之 Go

入群交流(和以上内容无关):加入Go大咖交流群,或添加微信:liuxiaoyan-s 备注:入群;或加QQ群:692541889

812 次点击  
加入收藏 微博
暂无回复
添加一条新回复 (您需要 登录 后才能回复 没有账号 ?)
  • 请尽量让自己的回复能够对别人有帮助
  • 支持 Markdown 格式, **粗体**、~~删除线~~、`单行代码`
  • 支持 @ 本站用户;支持表情(输入 : 提示),见 Emoji cheat sheet
  • 图片支持拖拽、截图粘贴等方式上传