序
本文主要研究一下promtail的Client
Client
loki/pkg/promtail/client/client.go
// Client pushes entries to Loki and can be stopped
type Client interface {
api.EntryHandler
// Stop goroutine sending batch of entries.
Stop()
}Client接口内嵌了api.EntryHandler接口，定义了Stop方法
EntryHandler
loki/pkg/promtail/api/types.go
// EntryHandler is something that can "handle" entries.
type EntryHandler interface {
Handle(labels model.LabelSet, time time.Time, entry string) error
}EntryHandler接口定义了Handle方法
client
loki/pkg/promtail/client/client.go
// Client for pushing logs in snappy-compressed protos over HTTP.
type client struct {
logger log.Logger
cfg Config
client *http.Client
quit chan struct{}
once sync.Once
entries chan entry
wg sync.WaitGroup
externalLabels model.LabelSet
}
// Handle implement EntryHandler; adds a new line to the next batch; send is async.
func (c *client) Handle(ls model.LabelSet, t time.Time, s string) error {
if len(c.externalLabels) > 0 {
ls = c.externalLabels.Merge(ls)
}
// Get the tenant ID in case it has been overridden while processing
// the pipeline stages, then remove the special label
tenantID := c.getTenantID(ls)
if _, ok := ls[ReservedLabelTenantID]; ok {
// Clone the label set to not manipulate the input one
ls = ls.Clone()
delete(ls, ReservedLabelTenantID)
}
c.entries <- entry{tenantID, ls, logproto.Entry{
Timestamp: t,
Line: s,
}}
return nil
}
// Stop the client.
func (c *client) Stop() {
c.once.Do(func() { close(c.quit) })
c.wg.Wait()
}client定义了logger、cfg、client、quit、once、entries、wg、externalLabels属性；它实现了Client接口的Handle、Stop方法；Handle方法判断LabelSet是否包含ReservedLabelTenantID，如果包含则会执行ls.Clone()及然后移除，之后构造entry发送到c.entries这个channel；Stop方法执行close(c.quit)
run
loki/pkg/promtail/client/client.go
func (c *client) run() {
batches := map[string]*batch{}
// Given the client handles multiple batches (1 per tenant) and each batch
// can be created at a different point in time, we look for batches whose
// max wait time has been reached every 10 times per BatchWait, so that the
// maximum delay we have sending batches is 10% of the max waiting time.
// We apply a cap of 10ms to the ticker, to avoid too frequent checks in
// case the BatchWait is very low.
minWaitCheckFrequency := 10 * time.Millisecond
maxWaitCheckFrequency := c.cfg.BatchWait / 10
if maxWaitCheckFrequency < minWaitCheckFrequency {
maxWaitCheckFrequency = minWaitCheckFrequency
}
maxWaitCheck := time.NewTicker(maxWaitCheckFrequency)
defer func() {
// Send all pending batches
for tenantID, batch := range batches {
c.sendBatch(tenantID, batch)
}
c.wg.Done()
}()
for {
select {
case <-c.quit:
return
case e := <-c.entries:
batch, ok := batches[e.tenantID]
// If the batch doesn't exist yet, we create a new one with the entry
if !ok {
batches[e.tenantID] = newBatch(e)
break
}
// If adding the entry to the batch will increase the size over the max
// size allowed, we do send the current batch and then create a new one
if batch.sizeBytesAfter(e) > c.cfg.BatchSize {
c.sendBatch(e.tenantID, batch)
batches[e.tenantID] = newBatch(e)
break
}
// The max size of the batch isn't reached, so we can add the entry
batch.add(e)
case <-maxWaitCheck.C:
// Send all batches whose max wait time has been reached
for tenantID, batch := range batches {
if batch.age() < c.cfg.BatchWait {
continue
}
c.sendBatch(tenantID, batch)
delete(batches, tenantID)
}
}
}
}client的run方法创建time.NewTicker(maxWaitCheckFrequency)，然后for循环，如果是c.entries读取到了数据就执行batch.add(e)，如果是maxWaitCheck触发了则遍历batches，执行c.sendBatch(tenantID, batch)及delete；最后quit的时候，还有defer方法遍历batches执行c.sendBatch(tenantID, batch)
sendBatch
loki/pkg/promtail/client/client.go
func (c *client) sendBatch(tenantID string, batch *batch) {
buf, entriesCount, err := batch.encode()
if err != nil {
level.Error(c.logger).Log("msg", "error encoding batch", "error", err)
return
}
bufBytes := float64(len(buf))
encodedBytes.WithLabelValues(c.cfg.URL.Host).Add(bufBytes)
ctx := context.Background()
backoff := util.NewBackoff(ctx, c.cfg.BackoffConfig)
var status int
for backoff.Ongoing() {
start := time.Now()
status, err = c.send(ctx, tenantID, buf)
requestDuration.WithLabelValues(strconv.Itoa(status), c.cfg.URL.Host).Observe(time.Since(start).Seconds())
if err == nil {
sentBytes.WithLabelValues(c.cfg.URL.Host).Add(bufBytes)
sentEntries.WithLabelValues(c.cfg.URL.Host).Add(float64(entriesCount))
for _, s := range batch.streams {
lbls, err := parser.ParseMetric(s.Labels)
if err != nil {
// is this possible?
level.Warn(c.logger).Log("msg", "error converting stream label string to label.Labels, cannot update lagging metric", "error", err)
return
}
var lblSet model.LabelSet
for i := range lbls {
if lbls[i].Name == LatencyLabel {
lblSet = model.LabelSet{
model.LabelName(HostLabel): model.LabelValue(c.cfg.URL.Host),
model.LabelName(LatencyLabel): model.LabelValue(lbls[i].Value),
}
}
}
if lblSet != nil {
streamLag.With(lblSet).Set(time.Since(s.Entries[len(s.Entries)-1].Timestamp).Seconds())
}
}
return
}
// Only retry 429s, 500s and connection-level errors.
if status > 0 && status != 429 && status/100 != 5 {
break
}
level.Warn(c.logger).Log("msg", "error sending batch, will retry", "status", status, "error", err)
batchRetries.WithLabelValues(c.cfg.URL.Host).Inc()
backoff.Wait()
}
if err != nil {
level.Error(c.logger).Log("msg", "final error sending batch", "status", status, "error", err)
droppedBytes.WithLabelValues(c.cfg.URL.Host).Add(bufBytes)
droppedEntries.WithLabelValues(c.cfg.URL.Host).Add(float64(entriesCount))
}
}sendBatch方法先通过batch.encode()编码为buf，然后通过c.send(ctx, tenantID, buf)进行发送
send
loki/pkg/promtail/client/client.go
func (c *client) send(ctx context.Context, tenantID string, buf []byte) (int, error) {
ctx, cancel := context.WithTimeout(ctx, c.cfg.Timeout)
defer cancel()
req, err := http.NewRequest("POST", c.cfg.URL.String(), bytes.NewReader(buf))
if err != nil {
return -1, err
}
req = req.WithContext(ctx)
req.Header.Set("Content-Type", contentType)
req.Header.Set("User-Agent", UserAgent)
// If the tenant ID is not empty promtail is running in multi-tenant mode, so
// we should send it to Loki
if tenantID != "" {
req.Header.Set("X-Scope-OrgID", tenantID)
}
resp, err := c.client.Do(req)
if err != nil {
return -1, err
}
defer helpers.LogError("closing response body", resp.Body.Close)
if resp.StatusCode/100 != 2 {
scanner := bufio.NewScanner(io.LimitReader(resp.Body, maxErrMsgLen))
line := ""
if scanner.Scan() {
line = scanner.Text()
}
err = fmt.Errorf("server returned HTTP status %s (%d): %s", resp.Status, resp.StatusCode, line)
}
return resp.StatusCode, err
}send方法执行一个POST的http请求发送到c.cfg.URL.String()
小结
promtail的client定义了logger、cfg、client、quit、once、entries、wg、externalLabels属性；它实现了Client接口的Handle、Stop方法；Handle方法构造entry发送到c.entries这个channel；Stop方法执行close(c.quit)；然后它还有一个run方法将entry添加到batch，然后将batch通过http的POST请求发送到指定的地址。
doc
有疑问加站长微信联系（非本文作者）
