crypto/cipher

type Block interface {
    // 返回加密字节块的大小
    BlockSize() int
    // 加密src的第一块数据并写入dst，src和dst可指向同一内存地址
    Encrypt(dst, src []byte)
    // 解密src的第一块数据并写入dst，src和dst可指向同一内存地址
    Decrypt(dst, src []byte)
}

Block接口代表一个使用特定密钥的底层块加/解密器。它提供了加密和解密独立数据块的能力。

type BlockMode ¶

type BlockMode interface {
    // 返回加密字节块的大小
    BlockSize() int
    // 加密或解密连续的数据块，src的尺寸必须是块大小的整数倍，src和dst可指向同一内存地址
    CryptBlocks(dst, src []byte)
}

BlockMode接口代表一个工作在块模式（如CBC、ECB等）的加/解密器。

func NewCBCEncrypter ¶

func NewCBCEncrypter(b Block, iv []byte) BlockMode

返回一个密码分组链接模式的、底层用b加密的BlockMode接口，初始向量iv的长度必须等于b的块尺寸。

Example

key := []byte("example key 1234")
plaintext := []byte("exampleplaintext")
// CBC mode works on blocks so plaintexts may need to be padded to the
// next whole block. For an example of such padding, see
// https://tools.ietf.org/html/rfc5246#section-6.2.3.2. Here we'll
// assume that the plaintext is already of the correct length.
if len(plaintext)%aes.BlockSize != 0 {
    panic("plaintext is not a multiple of the block size")
}
block, err := aes.NewCipher(key)
if err != nil {
    panic(err)
}
// The IV needs to be unique, but not secure. Therefore it's common to
// include it at the beginning of the ciphertext.
ciphertext := make([]byte, aes.BlockSize+len(plaintext))
iv := ciphertext[:aes.BlockSize]
if _, err := io.ReadFull(rand.Reader, iv); err != nil {
    panic(err)
}
mode := cipher.NewCBCEncrypter(block, iv)
mode.CryptBlocks(ciphertext[aes.BlockSize:], plaintext)
// It's important to remember that ciphertexts must be authenticated
// (i.e. by using crypto/hmac) as well as being encrypted in order to
// be secure.
fmt.Printf("%x\n", ciphertext)

func NewCBCDecrypter ¶

func NewCBCDecrypter(b Block, iv []byte) BlockMode

返回一个密码分组链接模式的、底层用b解密的BlockMode接口，初始向量iv必须和加密时使用的iv相同。

Example

key := []byte("example key 1234")
ciphertext, _ := hex.DecodeString("f363f3ccdcb12bb883abf484ba77d9cd7d32b5baecb3d4b1b3e0e4beffdb3ded")
block, err := aes.NewCipher(key)
if err != nil {
    panic(err)
}
// The IV needs to be unique, but not secure. Therefore it's common to
// include it at the beginning of the ciphertext.
if len(ciphertext) < aes.BlockSize {
    panic("ciphertext too short")
}
iv := ciphertext[:aes.BlockSize]
ciphertext = ciphertext[aes.BlockSize:]
// CBC mode always works in whole blocks.
if len(ciphertext)%aes.BlockSize != 0 {
    panic("ciphertext is not a multiple of the block size")
}
mode := cipher.NewCBCDecrypter(block, iv)
// CryptBlocks can work in-place if the two arguments are the same.
mode.CryptBlocks(ciphertext, ciphertext)
// If the original plaintext lengths are not a multiple of the block
// size, padding would have to be added when encrypting, which would be
// removed at this point. For an example, see
// https://tools.ietf.org/html/rfc5246#section-6.2.3.2. However, it's
// critical to note that ciphertexts must be authenticated (i.e. by
// using crypto/hmac) before being decrypted in order to avoid creating
// a padding oracle.
fmt.Printf("%s\n", ciphertext)

Output:

exampleplaintext

type Stream ¶

type Stream interface {
    // 从加密器的key流和src中依次取出字节二者xor后写入dst，src和dst可指向同一内存地址
    XORKeyStream(dst, src []byte)
}

Stream接口代表一个流模式的加/解密器。

func NewCFBEncrypter ¶

func NewCFBEncrypter(block Block, iv []byte) Stream

返回一个密码反馈模式的、底层用block加密的Stream接口，初始向量iv的长度必须等于block的块尺寸。

Example

key := []byte("example key 1234")
plaintext := []byte("some plaintext")
block, err := aes.NewCipher(key)
if err != nil {
    panic(err)
}
// The IV needs to be unique, but not secure. Therefore it's common to
// include it at the beginning of the ciphertext.
ciphertext := make([]byte, aes.BlockSize+len(plaintext))
iv := ciphertext[:aes.BlockSize]
if _, err := io.ReadFull(rand.Reader, iv); err != nil {
    panic(err)
}
stream := cipher.NewCFBEncrypter(block, iv)
stream.XORKeyStream(ciphertext[aes.BlockSize:], plaintext)
// It's important to remember that ciphertexts must be authenticated
// (i.e. by using crypto/hmac) as well as being encrypted in order to
// be secure.

func NewCFBDecrypter ¶

func NewCFBDecrypter(block Block, iv []byte) Stream

返回一个密码反馈模式的、底层用block解密的Stream接口，初始向量iv必须和加密时使用的iv相同。

Example

key := []byte("example key 1234")
ciphertext, _ := hex.DecodeString("22277966616d9bc47177bd02603d08c9a67d5380d0fe8cf3b44438dff7b9")
block, err := aes.NewCipher(key)
if err != nil {
    panic(err)
}
// The IV needs to be unique, but not secure. Therefore it's common to
// include it at the beginning of the ciphertext.
if len(ciphertext) < aes.BlockSize {
    panic("ciphertext too short")
}
iv := ciphertext[:aes.BlockSize]
ciphertext = ciphertext[aes.BlockSize:]
stream := cipher.NewCFBDecrypter(block, iv)
// XORKeyStream can work in-place if the two arguments are the same.
stream.XORKeyStream(ciphertext, ciphertext)
fmt.Printf("%s", ciphertext)

Output:

some plaintext

func NewOFB ¶

func NewOFB(b Block, iv []byte) Stream

返回一个输出反馈模式的、底层采用b生成key流的Stream接口，初始向量iv的长度必须等于b的块尺寸。

Example

key := []byte("example key 1234")
plaintext := []byte("some plaintext")
block, err := aes.NewCipher(key)
if err != nil {
    panic(err)
}
// The IV needs to be unique, but not secure. Therefore it's common to
// include it at the beginning of the ciphertext.
ciphertext := make([]byte, aes.BlockSize+len(plaintext))
iv := ciphertext[:aes.BlockSize]
if _, err := io.ReadFull(rand.Reader, iv); err != nil {
    panic(err)
}
stream := cipher.NewOFB(block, iv)
stream.XORKeyStream(ciphertext[aes.BlockSize:], plaintext)
// It's important to remember that ciphertexts must be authenticated
// (i.e. by using crypto/hmac) as well as being encrypted in order to
// be secure.
// OFB mode is the same for both encryption and decryption, so we can
// also decrypt that ciphertext with NewOFB.
plaintext2 := make([]byte, len(plaintext))
stream = cipher.NewOFB(block, iv)
stream.XORKeyStream(plaintext2, ciphertext[aes.BlockSize:])
fmt.Printf("%s\n", plaintext2)

Output:

some plaintext

func NewCTR ¶

func NewCTR(block Block, iv []byte) Stream

返回一个计数器模式的、底层采用block生成key流的Stream接口，初始向量iv的长度必须等于block的块尺寸。

Example

key := []byte("example key 1234")
plaintext := []byte("some plaintext")
block, err := aes.NewCipher(key)
if err != nil {
    panic(err)
}
// The IV needs to be unique, but not secure. Therefore it's common to
// include it at the beginning of the ciphertext.
ciphertext := make([]byte, aes.BlockSize+len(plaintext))
iv := ciphertext[:aes.BlockSize]
if _, err := io.ReadFull(rand.Reader, iv); err != nil {
    panic(err)
}
stream := cipher.NewCTR(block, iv)
stream.XORKeyStream(ciphertext[aes.BlockSize:], plaintext)
// It's important to remember that ciphertexts must be authenticated
// (i.e. by using crypto/hmac) as well as being encrypted in order to
// be secure.
// CTR mode is the same for both encryption and decryption, so we can
// also decrypt that ciphertext with NewCTR.
plaintext2 := make([]byte, len(plaintext))
stream = cipher.NewCTR(block, iv)
stream.XORKeyStream(plaintext2, ciphertext[aes.BlockSize:])
fmt.Printf("%s\n", plaintext2)

Output:

some plaintext

type StreamReader ¶

type StreamReader struct {
    S   Stream
    R   io.Reader
}

将一个Stream与一个io.Reader接口关联起来，Read方法会调用XORKeyStream方法来处理获取的所有切片。

Example

key := []byte("example key 1234")
inFile, err := os.Open("encrypted-file")
if err != nil {
    panic(err)
}
defer inFile.Close()
block, err := aes.NewCipher(key)
if err != nil {
    panic(err)
}
// If the key is unique for each ciphertext, then it's ok to use a zero
// IV.
var iv [aes.BlockSize]byte
stream := cipher.NewOFB(block, iv[:])
outFile, err := os.OpenFile("decrypted-file", os.O_WRONLY|os.O_CREATE|os.O_TRUNC, 0600)
if err != nil {
    panic(err)
}
defer outFile.Close()
reader := &cipher.StreamReader{S: stream, R: inFile}
// Copy the input file to the output file, decrypting as we go.
if _, err := io.Copy(outFile, reader); err != nil {
    panic(err)
}
// Note that this example is simplistic in that it omits any
// authentication of the encrypted data. It you were actually to use
// StreamReader in this manner, an attacker could flip arbitrary bits in
// the output.

func (StreamReader) Read ¶

func (r StreamReader) Read(dst []byte) (n int, err error)

type StreamWriter ¶

type StreamWriter struct {
    S   Stream
    W   io.Writer
    Err error // unused
}

将一个Stream与一个io.Writer接口关联起来，Write方法会调用XORKeyStream方法来处理提供的所有切片。如果Write方法返回的n小于提供的切片的长度，则表示StreamWriter不同步，必须丢弃。StreamWriter没有内建的缓存，不需要调用Close方法去清空缓存。

Example

key := []byte("example key 1234")
inFile, err := os.Open("plaintext-file")
if err != nil {
    panic(err)
}
defer inFile.Close()
block, err := aes.NewCipher(key)
if err != nil {
    panic(err)
}
// If the key is unique for each ciphertext, then it's ok to use a zero
// IV.
var iv [aes.BlockSize]byte
stream := cipher.NewOFB(block, iv[:])
outFile, err := os.OpenFile("encrypted-file", os.O_WRONLY|os.O_CREATE|os.O_TRUNC, 0600)
if err != nil {
    panic(err)
}
defer outFile.Close()
writer := &cipher.StreamWriter{S: stream, W: outFile}
// Copy the input file to the output file, encrypting as we go.
if _, err := io.Copy(writer, inFile); err != nil {
    panic(err)
}
// Note that this example is simplistic in that it omits any
// authentication of the encrypted data. It you were actually to use
// StreamReader in this manner, an attacker could flip arbitrary bits in
// the decrypted result.

func (StreamWriter) Write ¶

func (w StreamWriter) Write(src []byte) (n int, err error)

func (StreamWriter) Close ¶

func (w StreamWriter) Close() error

如果w.W字段实现了io.Closer接口，本方法会调用其Close方法并返回该方法的返回值；否则不做操作返回nil。

type AEAD ¶

type AEAD interface {
    // 返回提供给Seal和Open方法的随机数nonce的字节长度
    NonceSize() int
    // 返回原始文本和加密文本的最大长度差异
    Overhead() int
    // 加密并认证明文，认证附加的data，将结果添加到dst，返回更新后的切片。
    // nonce的长度必须是NonceSize()字节，且对给定的key和时间都是独一无二的。
    // plaintext和dst可以是同一个切片，也可以不同。
    Seal(dst, nonce, plaintext, data []byte) []byte
    // 解密密文并认证，认证附加的data，如果认证成功，将明文添加到dst，返回更新后的切片。
    // nonce的长度必须是NonceSize()字节，nonce和data都必须和加密时使用的相同。
    // ciphertext和dst可以是同一个切片，也可以不同。
    Open(dst, nonce, ciphertext, data []byte) ([]byte, error)
}

AEAD接口是一种提供了使用关联数据进行认证加密的功能的加密模式。

func NewGCM ¶

func NewGCM(cipher Block) (AEAD, error)

函数用迦洛瓦计数器模式包装提供的128位Block接口，并返回AEAD接口。